-
General Specifications Input voltage range 150-275V AC, 50 60Hz Output 1: KNX bus power with an integrated choke. (30VDC, SELV) Output 2: Additional voltage output. (30VDC, SELV) Short-circuit and overload protected outputs LED indicators for Power, Overload and Reset status On device reset with Reset Button -
General Specification
EAE KNX Universal Dimmer Actuator has dimming functions which can be used by phase dimming only. The device can be operated manually via push button over enclosure. Each channel can be programmed via ETS5. UD106 has 6 independent channels and 3 channel grouping features. Channel features of dimming actuator;- Staircase lighting
- Forced Operation
- Channel Grouping (merging outputs for higher power loads)
- Scene Function
- Electrical Measurements (Voltage)
- Error Detection (Load Error, Short-Circuit, Over-current, Over-voltage, Under-voltage, Over-heating )
-
SD110 1-10V Dim Actuator
10 x 16A 1-10V Dim Actuator
General Specification
10 independent channels that can be parameterized via ETS4/ETS5 Manual operation feature for each channel using membrane switches Each channel can actualize any of these functions separately Following function list provided;- Staircase
- Scene
- Operating Hour
- Forced Operation
-
RCU0800 Room Control Unit
8x16A Outputs
EAE Room Controller Unit is an all-in-one KNX device to control various different room units from a single interface. Room Control Unit provides control of lights, blinds and fan coils as well as optional dry contact inputs. -
RCU0808 Room Control Unit
8x16A Outputs + 8 Digital Inputs
EAE Room Controller Unit is an all-in-one KNX device to control various different room units from a single interface. Room Control Unit provides control of lights, blinds and fan coils as well as optional dry contact inputs. -
RCU1200 Room Control Unit
12x16A Outputs
EAE Room Controller Unit is an all-in-one KNX device to control various different room units from a single interface. Room Control Unit provides control of lights, blinds and fan coils as well as optional dry contact inputs. -
RCU1212 Room Control Unit
12x16A Outputs + 12 Digital Inputs
EAE Room Controller Unit is an all-in-one KNX device to control various different room units from a single interface. Room Control Unit provides control of lights, blinds and fan coils as well as optional dry contact inputs. -
RCU1600 Room Control Unit
16x16A Outputs
EAE Room Controller Unit is an all-in-one KNX device to control various different room units from a single interface. Room Control Unit provides control of lights, blinds and fan coils as well as optional dry contact inputs. -
KNX Room Control Unit 16ch, 16 Input Fancoil, Switch, Blind actuator
RCU1616 Room Control Unit
16x16A Outputs + 16 Digital Inputs
EAE Room Controller Unit is an all-in-one KNX device to control various different room units from a single interface. Room Control Unit provides control of lights, blinds and fan coils as well as optional dry contact inputs. -
RCU2000 Room Control Unit
20x16A Outputs
EAE Room Controller Unit is an all-in-one KNX device to control various different room units from a single interface. Room Control Unit provides control of lights, blinds and fan coils as well as optional dry contact inputs. SMP RCU2000 EAE S-KNX -
EAE Room Controller Unit is an all-in-one KNX device to control various different room units from a single interface. Room Control Unit provides control of lights, blinds and fan coils as well as optional dry contact inputs.General Specifications
Does not require an external power supply Room Control Unit covers all requirements of control in room applications and offers following functions:- Light switch
- AC/DC blind control
- Fan control
- Fan Coil Control (2 & 3 point valve)
- Dry contact inputs
- Staircase
- External logic
- Priority
- Sweep
- Switch / push button input
- Dimmer control
- Shutter/blinds control
- Value transfer
- Scene control
-
SMP UI108 EAE S-KNXUNIVERSAL INTERFACE 8 INPUTGeneral Specifications
- Colored connection cables
- Flush mounted into switch boxes
- Does not require an external power supply
- 8 input channels with each featuring following functions:
- Switching
- Dimming
- Curtain control
- Value and priority
- Scene control
- Pulse counter
-
General Specification
- 4 independently configurable channels
- Manual control for each relay on the device using slide switches
- Does not require an external power supply
- Electric current control can be configured
- Following functions can be defined separately for each channel:
- Stair function
- External logic
- Internal logic
- Priority function
- Threshold function
- Transaction time
- Sweep function
-
SMP SA108 EAE S-KNX SWITCH ACTUATOR 8x16A C-LOADGeneral Specification
8 independently configurable channels Manual control for each relay on the device using slide switches Does not require an external power supply Electric current control can be configured Following functions can be defined separately for each channel:- Stair function
- External logic
- Internal logic
- Priority function
- Threshold function
- Transaction time
- Sweep function
-
General Specifications
Fan Coil Actuator FCA100 covers HVAC systems of the electrical installation of room applications and offers following functions in one product.- Controlling fan coils (2 & 3-point valve)
- Additional Heat or Cooling
- Switching auxiliary load
- Dry contact inputs
- Temperature inputs
- Auxiliary Output x1 (Relay 16A)
- Fan Speed Output x3 (Relay 16A)
- Fan Speed Output x1 (0-10 V Signal)
- Valve Control Output x4 (Triac 0.5A)
- Valve Control Output x2 (0-10 V Signal)
- Dry Contact Input x4
- NTC Sensor Input x2
- Any kind of load (up to 16A per channel)
- Switch / push button sensor
- Dew-point sensor
- Window sensor
- Single
- Weighted (Multi temp sensor)
-
General Specifications
- Up to 64 DALI devices connectable to DALI Bus (Fluorescent-ECG, LED driver)
- Used with EAE DALI Commissioning Tool for DALI operations (addressing, grouping etc.)
- Individual load control and 16 lighting scenes
- Monitoring Fault status of DALI devices using different KNX group objects
-
16 DALI Group Control
DA100 KNX-DALI Gateway operates between KNX and DALI bus. DALI power supply is integrated in the device. DA100 is compliant with IEC 62386 standard.General Specifications
- Up to 64 DALI devices connectable to DALI Bus (electronic ballast, LED driver, ECK)
- Used with EAE DALI Commissioning Tool for DALI operations (addressing, grouping etc.)
- 16 DALI Groups and 64 different lighting scenes
- Each DALI group configurable to function as constant light, corridor or sequence function
- Functional and battery life tests for DALI compliant emergency lighting fixtures to be sent through KNX
- Monitoring Fault status of DALI devices as different KNX group objects
